Sony STR-DA5600ES - Manual (Page 117)

117 GB
Adju
stin
g Setti
ngs
x TYPE A
Places surround back speakers on the back
wall in addition to those speakers in
Recommendation ITU-R for 5.1 channel
speaker placement.
x TYPE B
Places four surround speakers at virtually
identical angles, according to
Recommendation ITU-R for 7.1 channel
speaker placement.
x OFF
Does not relocate speaker positioning.
Notes
• This function does not work in the following cases.
– When you select “OFF” for the auto calibration
type (page 115).
– When you set “A.P.M.” to “OFF” (page 116).
– When the speaker pattern is set so that there are
no surround speakers.
• This function does not work in the following cases.
– DTS-HD signals with a sampling frequency of
88.2 kHz and higher are being received.
– Dolby TrueHD signals with a sampling
frequency of 176.4 kHz and higher are being
received.
• Signals with a sampling frequency of 88.2 kHz and
higher are always played back at either 44.1 kHz or
48 kHz.
Lets you set the pair match mode for the auto
calibration EQ pattern.
x ALL
Calibrates all the speakers using the pair match
processing of the left and right channels for
each pair of speakers.
x SUR
Calibrates the surround speakers and the
surround back speakers using the pair match
processing or the left and right channels for
each pair of speakers.
x OFF
Calibrates each speaker individually.
Notes
• This function does not work when auto calibration
is not performed.
• You cannot set “SP Pair Matching” to “ALL” when
you select “Front Reference” for the auto
calibration type (page 115).
You can set the reference value when you
select “Front Reference” for the auto
calibration type (page 115).
x L/R
Sets the data of the left and right channels to
the reference value.
Drawing of the relocated speaker placement
Drawing of the relocated speaker placement
SP Pair Matching
Front Ref Type
continued