Sony STR-DA5600ES - Manual (Page 16)

16 GB
Multifunction remote
commander
(RM-AAL031/RM-AAL032)
The RM-AAL031 remote is supplied with the
USA/Canadian model only and RM-AAL032
is supplied with the European model only. The
RM-AAL031 remote is used for illustration
purpose. Any differences in operation are
clearly indicated in the text, for example,
“USA/Canadian model only.”
A AV ?/1 (on/standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate (page 153).
If you press ?/1 (2) at the same time, it
will turn off the receiver and all other
components including an amplifier in
zone 2 or zone 3 (SYSTEM STANDBY).
Note
The function of the AV ?/1 switch changes
automatically each time you press the input
button (5).
B ?/1 (on/standby)
Press to turn the receiver on or off.
If you press ZONE (3) to switch the
remote to zone 2 (zone 3) mode, you can
turn the power for zone 2 (zone 3) on or
off using ?/1.
C ZONE (page 94)
D AMP
Press to enable the receiver operation for
main zone.
E Input buttons
Press one of the buttons to select the
component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned
to control Sony components (page 58).
You can program the remote to control
non-Sony components following the steps
in “Programming the remote” (page 153).
F TV INPUT
Press TV (ws), then press TV INPUT to
select the input signal of a TV.
(Input select) (European model
only)
Selects the input signal (TV or video).
(Text hold) (European model
only)
In text mode: Holds the current page.
G GUIDE (
(Guide) for European
model)
Press SHIFT (wd), then press GUIDE to
display the on-screen program guide.