Sony STR-DA5600ES - Manual (Page 45)

45 GB
G
e
tting Star
te
d
4
Press V/v repeatedly to select
“Impedance,” then press .
5
Press V/v repeatedly to select
“4
Ω” or “8 Ω” depending on
the speakers you are using,
then press
.
The parameter you have selected is
entered.
To exit the menu
Press MENU.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a nominal
impedance of 8 ohms or higher, set “Impedance” to
“8
Ω.” When connecting other types of speakers,
set it to “4
Ω.”
• When you connect front speakers to both the
FRONT A and FRONT B/FRONT HIGH
terminals, connect the speakers with a nominal
impedance of 8 ohms or higher.
– When you connect speakers with impedance of
16 ohms or higher in both “A” and “B/
FRONT HIGH” configuration:
Set “Impedance” to “8
Ω” in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set “Impedance” to “4
Ω” in the Speaker
settings menu.
Select the speaker pattern according to the
speaker system which you are using.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press V/v repeatedly to select
“ Settings,” then press or
b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Speaker,” then press or b.
4
Press V/v repeatedly to select
“Speaker Pattern,” then press
.
The Speaker Pattern screen appears.
5
Press V/v to select the speaker
pattern you want, then press
.
6
Press RETURN/EXIT O.
Selecting the speaker pattern
continued