Sony STR-DA5600ES - Manual (Page 132)

132 GB
Lets you activate the server function of the
receiver.
x OFF
x ON
Let you turn the function which controls the
receiver from external controllers on the home
network on or off.
x OFF
x ON
Note
If you set “Controllers,” set “External Control” to
“ON.”
Lets you set availability of operations allowed
for the receiver for network controllers on the
home network that have attempted to access
the receiver in the past.
1
Select “Controllers,” then press
.
The setting screen used for Controllers
appears on the TV screen.
2
Select the controller you want
to allow to operate the receiver
from the list, then press
to
check the box.
When you check the box for “Auto
Permission,” all the controllers detected
are checked automatically.
3
Select “Finish,” then press .
To cancel the setup
Select “Cancel,” then press in step 3.
To remove the detected
controllers from the list
1 Select the controller you want to
remove from the list, then press
to
check the box.
2 Select “Remove All,” then press .
Tip
Up to 10 network controllers that have attempted to
access the receiver are listed, and each of them can
control the receiver.
Lets you assign a device name to the receiver
up to 20 characters displayed as being on the
home network.
To assign the device name
1 Select “Device Name,” then press .
2 Press .
The soft keyboard appears on the TV
screen.
3 Press V/v/B/b and to select a
character one by one to enter the
device name.
4
Select “Finish,” then press .
When the setting is applied to the receiver,
the receiver will restart automatically.
Tip
The default device name is “STR-DA5600ES.”
Lets you enter the Rhapsody Account to listen
to the Rhapsody Internet radio service. For
details, see “Setting an account” (page 88).
Rhapsody is only available in the US.
Server Function
External Control
Controllers
Device Name
Rhapsody Account