Sony STR-DA5600ES - Manual (Page 18)

18 GB
X Numeric buttons
Press SHIFT (wd), then press to
– preset/tune to preset stations.
– select track numbers of the CD player,
DVD player, Blu-ray Disc Player or
MD deck. Press -/-- (wg) to select track
number 10.
– select channel numbers of the VCR or
satellite tuner.
– After pressing TV (ws), press the
numeric buttons to select the TV
channels.
Y -/--
Press to
– select track numbers over 10 of the CD
player, DVD player, Blu-ray Disc
Player, or MD deck.
– select channel numbers over 10 of the
TV, Satellite tuner or the VCR.
Z PIP
Press SHIFT (wd), then press PIP to
switch the image of the PIP (Picture in
Picture) window. The image of the PIP
window is the one from the EXT VIDEO
IN jack or the one to the zone 2. You can
swap the position of the main screen and
the PIP window by pressing
(qf).
Note
When the HDMI input is selected on the
main screen, you cannot swap the
position of the main screen and the PIP
window.
wj HDMI OUTPUT (page 105)
wk GUI MODE (page 55)
wl DISPLAY
Press repeatedly to select information
displayed on the display.
, (Info, Text reveal)
(European model only)
Displays information such as current
channel number and screen mode.
In text mode: Reveals hidden information
(e.g., answers to a quiz).
e; RETURN/EXIT O
Press to return to the previous menu or
exit the menu while the menu or
on-screen guide of the Blu-ray Disc
Player, DVD player, or satellite tuner is
displayed on the TV screen.
ea CATEGORY +/– (USA/Canadian
model only)
Press to select the category for satellite
tuner.
B·/·b
Press to select an album.
es DISC SKIP
Press to skip a disc when using a multi-
disc changer.
ed MASTER VOL +/– ( +/– for
European model)
Press to adjust the volume level of all
speakers at the same time.
TV VOL +/– ( +/– for European
model)
Press TV (ws), then press TV VOL +/– to
adjust the volume level of the TV.
ef MUTING ( (Muting) for European
model)
Press to turn off the sound temporarily.
Press the button again to restore the
sound.
eg BD/DVD/TOP MENU, MENU
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/
b and to perform a menu operations.
MACRO1, MACRO2 (page 157)
Press AMP (4), then press MACRO 1 or
MACRO 2 to set up the macro function.
1)
See the table on page 152 for information on the
buttons that you can use to control each
component.
2)
The tactile dot is attached to these buttons
(VIDEO 2/5, N, PRESET +/TV CH + (PROG +
for European model), c (European model only)).
Use as a mark of operation.