Sony MEX-BT2500 - Manual (Page 9)

9
E Disc slot
To insert the disc (label side up). Playback
starts automatically.
F Display window
G AUX input jack 16
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I
(front panel release) button 6
J BTM button 10
To start the BTM function (press and hold).
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
1 :
To skip tracks (press).
L MODE button 10
To select the radio band (FM/AM).
M DSPL (display)/DIM (dimmer) button
10
To change display items (press); change the
display brightness (press and hold).
N Number buttons
CD:
(1)/(2): ALBM –/+*
2
To skip albums (press); skip albums
continuously (press and hold).
(3): REP 10
(4): SHUF 10
(6): PAUSE*
3
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
1 :
(6): PAUSE
To pause playback. To cancel, press
again.
O SCRL (scroll) button 10
To scroll the display item.
P Receptor for the card remote
commander
Q RESET button (located behind the front
panel) 5
R Microphone 13
Note
Do not cover the microphone, the handsfree
function may not work properly.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 5).
ql < (.)/, (>) buttons
The same as (SEEK) –/+ on the unit.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select)/ (handsfree) button
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
*2 When an MP3/WMA is played.
*3 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 19.