Alliance Laundry Systems T453I - Manual (Page 13)

11 M414462 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions
Step 1: Clean Lint Screen/
Compartment
Remove any accumulated lint from the lint screen and
compartment. Close panel tightly against tumbler
frame and lock panel securely.
Step 2: Load Laundry
Open tumbler door and load cylinder with laundry. DO
NOT OVERLOAD.
NOTE: Overloading causes slow drying and
wrinkling.
Close cylinder door. Tumbler will not operate with the
door open.
Step 3: Determine Required
Temperature
The type of fabric being dried will determine the
setting. Consult the fabric-care label or fabric
manufacturer to determine proper temperature setting.
IMPORTANT: ALWAYS FOLLOW THE FABRIC
CARE INSTRUCTIONS SUPPLIED BY THE
GARMENT MANUFACTURER.
Step 4: Determine Control Type
Refer to the following pages and use the appropriate
instructions for the control type.
Stacked Tumblers Only: Use the correct coin slot and
control panel for the top or bottom cylinder.
To reduce the risk of fire:
• DO NOT DRY articles containing foam rubber or similarly textured rubberlike materials.
• DO NOT DRY plastics, anything containing wax or chemicals such as mops and cleaning
cloths, or anything dry-cleaned at home with a dry-cleaning solvent.
• DO NOT TUMBLE fiberglass curtains and draperies unless the label says it can be done. If
they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.
W076
To reduce the risk of serious injury, open tumbler door and allow cylinder to stop before
cleaning lint screen. Do not operate without lint panel in place.
W077
WARNING
Clean lint screen and lint compartment
daily. Failure to clean the lint screen daily
will result in higher than normal
temperatures that may damage laundry.
W331
CAUTION
To reduce the risk of serious injury, open
tumbler door and allow cylinder to stop
before cleaning lint screen. Do not operate
without lint panel in place.
W077
WARNING