Alliance Laundry Systems T453I - Manual (Page 33)

31 M414462 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before You Call for Service
IMPORTANT: All tumbler panels must be in place
for proper operation.
You may save time and money by checking the
following:
If the Tumbler:
Won’t
Start
Won’t
Heat
Clothes
Not Dry
Possible Reason – Do This to Correct
• Insert coin(s). (Coin Drop Models Only)
• Close the loading door tightly.
• Press the PUSH TO START button.
• Be sure power cord is plugged all the way into the electrical outlet.
• Drying timer is in OFF position.
• Check the main fuse and circuit breaker.
• Insufficient air flow.
• Gas shut-off valve in OFF position.
• Are controls properly set?
• Broken drive belt. Call the service person.
• • Tumbler is in Cool Down Mode.
• • Lint screen clogged. Clean lint screen.
• • Exhaust duct to outside is blocked. Clean out.