Alliance Laundry Systems T453I - Manual (Page 30)

Maintenance
M414462 28 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 17
Monthly
Lubrication
Motor bearings, roller bearings and trunnion bearings
are sealed bearings and require no lubrication.
Lint Removal
Remove the exhaust duct from the exhaust thimble and
remove lint. If excessive lint is evident at the thimble,
further disassemble the duct work and remove lint.
Energy Saver Gas Models: Remove the cleanout cover
at the bottom of the vertical duct and clean out lint.
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
T046I
1 Thermostat Sensing Probe
2 Lint Screen
WARNING
T046I
2
1
50 – 170 POUND TUMBLERS