Removing the unit, Specifications, Removing the unit specifications – Sony DSX-S100 User Manual

Page 23

Advertising
background image

23

Removing the unit

1

Remove the protection collar.

1

Detach the front panel (page 7).

2

Pinch both edges of the protection collar,
then pull it out.

2

Remove the unit.

1

Insert both release keys simultaneously
until they click.

2

Pull the release keys to unseat the unit.

3

Slide the unit out of the mounting.

Specifications

Tuner section

FM

Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz

AM

Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 25 kHz
Sensitivity: 26 µV

USB Player section

Interface: USB (Full-speed)
Maximum current: 500 mA

Power amplifier section

Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W

× 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front, sub/rear switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal

Inputs:

BUS control input terminal
BUS audio input terminal
Remote controller input terminal
Antenna (aerial) input terminal
Telephone ATT control terminal
Illumination control terminal
AUX input jack (stereo mini jack)

USB port

x

Hook facing
inwards.

continue to next page

t

FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX
ÉTATS-UNIS. NON APPLICABLE AU
CANADA, Y COMPRIS LA PROVINCE DE
QUÉBEC.

CEA2006 Standard
Power Output: 17 Watts RMS
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)

AUDIO POWER SPECIFICATIONS

4 at

Advertising