Sony MZ-B100 - Manual (Page 15)

15
-GB
To listen in stereo
Connect the supplied headphones with a remote control to the i jack on the recorder.
If the play does not start
Make sure the recorder is not locked (pages 9
and 41).
To locate a point quickly
Use the EASY SEARCH +/– buttons (page 28).
z
Playback will switch automatically between
stereo and monaural according to the sound
source.
Notes
• The sound may skip during playback when the
recorder is exposed to continuous vibration,
such as while jogging.
• If the power supply is disrupted (i.e. the
batteries are removed or become exhausted or
the optional AC power adaptor is
disconnected) when the recorder is operating,
the lid may not open until the power is
restored.
To Operation on the recorder Operation on the remote
control (Beeps in the
headphones)
Find the beginning of
the current track or a
previous track
1)
Press .REVIEW/AMS.
Press .REVIEW/AMS
repeatedly until you reach the
beginning of the desired track. Press .. (Three short beeps)
Press . repeatedly until you
reach the beginning of the
desired track.
Find the beginning of
the next track
2)
Press >CUE/AMS. Press >N. (Two short
beeps)
Pause Press XPAUSE. Press
XPAUSE again to resume
play. Press X on the remote control.
(Continuous short beeps) Press
X again to resume play.
Go backwards while
playing Press and hold .REVIEW/
AMS. Press and hold ..
Go forward while
playing Press and hold >CUE/
AMS. Press and hold >N.
Remove the MD Press xSTOP and open the
lid.
3)
Press x. (One short beep)
1) If you press .REVIEW/AMS during the first track of the disc, the recorder goes to the beginning
of the last track on the disc.
2) If you press >CUE/AMS during the last track of the disc, the recorder goes to the beginning of the
first track on the disc.
3) Once you open the lid, the point to start play will change to the beginning of the first track.