Sony MZ-B100 - Manual (Page 27)

27
-GB
Various ways of playback
Changing the sound
setting
You can select your desired sound when
playing.
This function is effective when
using the supplied headphones to
listen to stereo recordings.
1
Press SOUND repeatedly.
Each time you press the button, A
changes as follows.
To cancel the sound setting
Press SOUND repeatedly until nothing
appears in the display .
Notes
• The use of the Voice Up function is not
recommended when playing a music disc.
• You cannot set the Voice Up function on
monaural recording.
• If sound distortion occurs when you turn the
volume up while “SOUND 1” or “SOUND 2”,
turn the volume down again or change the
play mode.
• The setting of “SOUND 1” or “SOUND 2”
does not affect the sound being recorded.
A Sound setting
— (none) Factory setting
SOUND 1 Strong bass
(Digital Mega Bass 1)
SOUND 2 Stronger bass
(Digital Mega Bass 2)
V-UP 1) Enhancing voice clarity
(Voice Up function)
SOUND
SOUND
003
20:51
A
1) During stereo playback, the Voice Up function
emphasizes the left-right orientation of
individual voices, making them easier to
distinguish and hear. You cannot use the Voice
Up function when monaural recording.