Power sources, When to replace the batteries, Battery life – Sony MZ-B100 User Manual

Page 42

Advertising
background image

42

-GB

Power sources

You can power the recorder not only with
alkaline dry battery (not supplied) but also
with house current. You cannot, however,
use manganese dry battery.

When to replace the
batteries

You can check the battery condition with
the battery indication which is displayed
while using the player. The battery
indicator changes as the table below due
to the battery condition.
The battery level indicator is approximate.

Notes

Stop the recorder before replacing batteries.
An optional AC power adaptor is

recommended for long recording.

Battery
indicator

Condition

t

Battery power decreasing.

r

(flashing)

Weak battery.

e

(flashing)

The battery has gone out.
“LOW BATT” flashes in
the display on the remote
control, and the power
goes off.

Battery life

1)

When recording

2)3)

(Unit: approx.hours)(JEITA

4)

)

1)

The battery life may be shorter due to
operating conditions and the temperature of
the location.

2)

When using a Sony LR6 (SG) “STAMINA”
alkaline dry battery (produced in Japan).
Recording time may differ according to the
alkaline batteries.

3)

When recorded with the built-in microphones.

Recording mode

Approx. hours

Stereo

9

LP2 Stereo

12.5

LP4 Stereo

15

MONO

12

4)

Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.

When playing

1)

(Unit: approx.hours)(JEITA

2)

)

Recording
mode

Speaker

3)

Headphones

4)

Stereo

25.5

34.5

LP2 Stereo

27

39.5

LP4 Stereo

30

43

MONO

30

43

1)

When using a Sony LR6 (SG) “STAMINA”
alkaline dry battery (produced in Japan).

2)

Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.

3)

When played using the built-in speaker.

4)

When played using headphones.

Advertising