Sony MZ-B100 - Manual (Page 39)

39
-GB
5
Press . or > repeatedly until
the number of the destination track
within the group flashes in the
display, and then press EDIT/
ENTER.
z
You can also use the SPEED CONTROL dial to
select and then enter the menu. Turn the dial
(instead of ./>) to show the menu items
one by one and press the dial (instead of EDIT/
ENTER) to enter the selected menu.
Changing the order of a
group on a disc (Group
move)
1
Press GROUP for 2 seconds or more.
“
” lights up in the display and the
group mode turns on.
2
While playing a track within a group
whose order you want to change,
press EDIT/ENTER.
3
Press . or > repeatedly until
“
: Move” flashes in the display,
and then press EDIT/ENTER.
You can now move the selected
group.
4
Press . or > repeatedly to
select the destination point on the
disc, and then press EDIT/ENTER.
z
You can also use the SPEED CONTROL dial to
select and then enter the menu. Turn the dial
(instead of ./>) to show the menu items
one by one and press the dial (instead of EDIT/
ENTER) to enter the selected menu.
Erasing tracks
To erase a track
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to verify the contents of
the track you want to erase.
1
While playing the track you want to
erase, press ERASE.
“Erase OK?” and “PushENTER”
appear alternately in the display and
the recorder plays the selected track
repeatedly.
2
Press EDIT/ENTER.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To cancel erasing
Press xSTOP.
. /> EDIT/ENTER
GROUP
EDIT/ENTER
ERASE