Error displays/messages, 29 error displays/messages – Sony CDX-M850MP User Manual

Page 29

Advertising
background image

29

Error displays/Messages

*1

When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.

*2

The disc number of the disc causing the error
appears in the display.

*3

“Failure” (small case) and “FAILURE” (upper case)
are different messages.

If these solutions do not help improve the
situation, consult your nearest Sony dealer.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna control lead (blue)

or accessory power supply lead (red) to the
power supply lead of the car’s antenna
booster. (Only if your car has a built-in FM/
AM antenna in the rear/side glass.)

• Check the connection of the car antenna.
• The auto antenna will not go up.

t Check the connection of the power

antenna control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to off (page 23).

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set the local seek mode to “off” (page

21).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to the monaural reception mode (page

21).

A program broadcast in stereo is heard in
monaural.

• The unit is in monaural reception mode.

t Cancel monaural reception mode (page

21).

Interference occurs during FM reception.

The wide mode is selected.
t Set the IF mode to “IF Auto” (page 21).

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

Blank

*

1

No tracks have been recorded on an MD*

2

.

t Play an MD with recorded tracks on it.

Error

*

1

• A CD is dirty or inserted upside down*

2

.

t Clean or insert the CD correctly.

• A CD/MD cannot play because of some

problem*

2

.

t Insert another CD/MD.

Failure

*

3

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

FAILURE

*

3

When the XM tuner is connected, storing an
XM radio channel into a preset failed.
t Be sure to receive the channel that you

want to store, then try it again.

High Temp

The ambient temperature is more than 50°C
(122°F).
t Wait until the temperature goes down

below 50°C (122°F).

NO Disc

*

1

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO Magazine

The disc magazine is not inserted in the CD
unit.
t Insert the magazine in the CD unit.

NO Music

*

2

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

Offset

There may be an internal malfunction.
t Check the connection. If the error

indication remains on in the display,
consult your nearest Sony dealer.

Push Reset

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

Messages

Local Seek +/–

The Local Seek mode is on during automatic
tuning (page 16).

” or “

You have reached the beginning or the end of
the disc and you cannot go any further.

Advertising