Panasonic DMC-FZ70K - Manual (Page 144)

Application (Record)
Using the [Rec] menu
VQT5B76
- 144 -
•For the setting procedures of the menu. (→57)
[Quality]
Set quality of picture.
■
Settings
[Fine]
Gives priority to picture quality and saves pictures in
JPEG file format.
[Standard]
Saves pictures in JPEG file format using standard
picture quality.
[RAW+Fine] Saves pictures in JPEG file format in addition to the
RAW file format.* 1
[RAW+Standard]
[RAW]
Saves pictures in the RAW file format.* 2
[3D+Fine] Simultaneously saves 3D still picture data (MPO) and
pictures in JPEG file format. (Only when [3D Photo
Mode] Scene Mode is set.)
[3D+Standard]
*
1 If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.
*
2 You cannot set the picture size. (The pictures are saved using the maximum
recordable pixels for each image aspect ratio.)
■
About RAW file
You can use Ichikawa Soft Laboratory’s “SILKYPIX Developer Studio” to save RAW
pictures in JPEG or other file formats that can be displayed on a PC, etc., in order to
perform advanced editing.
Download “SILKYPIX Developer Studio” from website and install it on your computer to
use. For details on how to download the software, etc., refer to (→192) .
●
[Quality] is fixed to [ ] in [High Sens.] Scene Mode.
●
You cannot set to [ ], [ ], or [ ] in the following cases.
•[Panorama Shot] Mode
•[Panning] [Handheld Night Shot] [HDR] ([Scene Mode])
•When [Burst] is set to [ ]