Panasonic DMC-FZ70K - Manual (Page 73)

Basics
Using the [Setup] menu
VQT5B76
- 73 -
•For the setting procedures of the menu. (→57)
[Format]
Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting
the built-in memory or card.
When a card/built-in memory is formatted, the data cannot be restored. Check the
content of the card/built-in memory carefully before formatting.
●
To format the built-in memory, remove the card.
(Only inserted card will be formatted if present; built-in memory will be formatted if no
card is inserted.)
●
All protected pictures and other picture data will be deleted.
●
This requires a sufficiently charged battery, or an AC adaptor (optional) and DC
coupler (optional). Do not turn off power or perform other operations during formatting.
●
Always format cards with this camera.
●
Formatting the built-in memory may take several minutes.
●
If the card cannot be formatted, please try another card before contacting your
nearest Service Center.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact
us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649).
[Language]
Change display language.
Set the language displayed on the screen.
[Stabilizer Demo.]
Extent of jitter is shown on graph (estimate).
Extent of jitter
Extent of jitter after correction
●
During demo screen display, the Optical Image Stabilizer switches ON and OFF every
time [MENU/SET] is pressed.