Panasonic DMC-FZ70K - Manual (Page 206)

Others
Optional accessories
VQT5B76
- 206 -
●
You can set the aperture value, the shutter speed and the ISO sensitivity on the
camera even when attaching the external flash.
●
Some commercial external flashes have synchro terminals with high-voltage or
reversed polarity. Using such extra flashes may cause a malfunction or the camera
may not operate normally.
●
If you use commercially available external flashes with communication functions other
than the dedicated one, they may not operate normally or they may be damaged. Do
not use them.
●
Even if the external flash is turned off, the camera may enter the External Flash Mode
when the external flash is attached. When you are not using the external flash, detach
it.
●
When attaching the external flash, the built-in flash cannot be activated.
●
Do not open the built-in flash when an external flash is attached.
●
The camera will become unstable when attaching the external flash, it is
recommended to use a tripod when taking picture.
●
Turn off the camera when removing the external flash.
●
Detach the external flash when carrying the camera.
●
When attaching the external flash, do not hold only the external flash because it may
detach from the camera.
●
If you use the external flash when the White Balance is set to [ ] finely adjust the
White Balance depending on the picture quality. (→92)
●
If you take pictures close to the subject in Wide, the vignetting effect may appear on
the bottom of the recorded picture.
●
This unit does not support wireless mode and is not capable of recording using the
DMW-FL360L wireless external flash.
●
Read the operating instructions of the external flash for details.