Play on monitor, Auto review, No.reset – Panasonic DMC-FZ70K User Manual

Page 69: Basics

Advertising
background image

Basics

Using the [Setup] menu

VQT5B76

- 69 -

•For the setting procedures of the menu.

(→57)

[Play on Monitor]

Pictures are automatically played back on the LCD monitor after switching from recording

mode to playback mode.

Settings

[ON]

Pictures are played back on the LCD monitor.

[OFF]

Pictures are played back on the viewfinder or the LCD monitor depending on

which one was used to play back pictures previously.

[Auto Review]

Automatically display still pictures immediately after taking them.

Settings

[HOLD]

Keeps the automatic playback screen displayed until [MENU/SET] is

pressed.

[2 SEC.] / [1 SEC.] Displays the playback screen for the set time before automatically returning

to the recording screen.

[OFF]

The last picture is automatically reviewed in the following cases.

•[Auto Bracket]

•Bracket recording using White Balance

•[Burst]

For [Intelligent Auto] Mode, the setting is fixed to [2 SEC.].

Motion pictures cannot be automatically reviewed.

[No.Reset]

Reset picture file numbers. (The folder number is updated and the file number starts from

0001.)

•To reset folder number to 100:

First, format the built-in memory or card, and reset the file numbers using [No.Reset].

Then, select [Yes] on the folder number reset screen.

A folder number between 100 and 999 can be assigned.

Numbers cannot be reset once folder number reaches 999. In this case, save all

necessary pictures to your computer, and format the built-in memory/card

(→73)

.

Advertising