Panasonic DMC-FZ70K - Manual (Page 99)

Application (Record)
Taking pictures with Auto Focus
VQT5B76
- 99 -
■
Changing the position and size of the AF area
When [AF Mode] is set to [ ] (1-area-focusing), you can change the position or size of
the AF area at the center.
If you performing any of the following operations, the screen will switch to the settings
menu.
•When [ ] is selected, press [FOCUS].
•From the menu screen, select [ ], and press .
To change the AF area
To move the AF area: Press
To change the size of the AF area: Rotate the rear dial
•To restore the AF area to its initial state (position and
size) → Press [DISP.] button
Press [MENU/SET]
●
The AF area position and size are stored in the memory even when the camera is
turned off.
●
AF area cannot be moved during motion picture recording.
●
When the AF area is small, it may be difficult to adjust the focus.
●
When [Metering Mode] is set to [ ] (spot-focusing), the new position of the AF area
will be measured.
●
The position and size cannot be changed in [Miniature Effect] of [Creative Control]
mode.