Video rec area, Remaining disp, Highlight – Panasonic DMC-FZ70K User Manual

Page 66: Basics

Advertising
background image

Basics

Using the [Setup] menu

VQT5B76

- 66 -

•For the setting procedures of the menu.

(→57)

[Video Rec Area]

Enables verification of the recordable area for a motion

picture before recording.

Settings: [ON] / [OFF]

Recordable area displayed for motion pictures should be interpreted as a guideline.

Recording area display may disappear when zooming to Tele depending on the

picture size setting.

For [Intelligent Auto] Mode, the setting is fixed to [OFF].

[Remaining Disp.]

Switch the display between the remaining number of still pictures you can take or the

remaining recording time of a motion picture that you can record for the available card or

built-in memory.

Settings

Displays the number of pictures that can be recorded.

Displays the remaining recording time.

[Highlight]

You can set overexposed areas (areas that are too bright and where there are no shades

of gray) to flash on the screen when the [Auto Review] function is activated or during

playback.

Settings: [ON] / [OFF]

To reduce overexposed areas, record a picture by setting negative exposure

compensation using the histogram display and so on as a reference.

(→82)

(The right

edge of the histogram shows the overexposed portion.)

This feature is disabled during Multi Playback, [Calendar], Playback Zoom, motion

picture playback or automatic scrolling playback of panorama pictures.

If the subject is too close to the camera when recording using flash, overexposure

may occur.

Advertising