Panasonic DMC-TS5D - Manual (Page 122)

- 122 -
GPS/Sensor
When [GPS Setting] is set to [ON], positioning is performed at regular intervals. When the
positioning is successful, location name information and latitude/longitude are acquired. For
details on the screen display for the acquired information, read “About the display of positioning
status and positioning results” on
P123 .
• If GPS automatic time correction is set in the time settings at the time of purchase, [GPS Setting] will
be set to [ON] automatically.
1
Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select the settings and then press [MENU/SET].
• When [GPS Setting] is set to [ON], the GPS function will operate even when this unit is turned
off. Electromagnetic waves from this unit may affect other electronic devices, so set
[GPS Setting] to [OFF] or [Airplane Mode] to [ON] and turn the unit off when you carry this
unit onboard an airplane or inside a hospital, etc.
Acquiring of the GPS information
Settings Description of settings
[ON]
Set the unit to receive the GPS satellite radio waves.
• Positioning continues even when this unit is turned off.
[OFF] —
[INFO]
You can confirm and update the current reception status.
• It is displayed when [ON] is set.
• For detail, refer to “ Update the GPS information ” on P125 .
• Exit the menu after it is set.
• GPS status indicator is lit during the positioning. Also,
when the GPS status indicator is lit with this unit is turned
off, [GPS Setting] is set to [ON].
A GPS status indicator
