Panasonic DMC-TS5D User Manual
Page 266
- 266 -
Others
•
When the brightness changes due to zoom or camera movement etc., the lens may click and the
picture on the screen may drastically change. However, the picture is not affected. The sound is
caused by the automatic adjustment of the aperture. This is not a malfunction.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
•
When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
•
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3
k digital zoom.
•
When you perform an operation after taking a certain action, the pictures may be recorded in folders
with different numbers from the ones used prior to the operation.
•
If you insert or remove the battery before turning off this unit, the folder and file numbers for the
pictures taken will not be stored in the memory. When this unit is turned on again and pictures are
taken, they may be stored under file numbers which should have been assigned to previous
pictures.
•
Formatting is not available in Intelligent Auto Mode. Switch the recording mode to another one.
•
When [GPS Setting] is set to [OFF], magnetic declination is not corrected.
> Perform [Repositioning] of [GPS/Sensor] menu
, and acquire correct latitude/longitude of
the current location.
The lens clicks.
The clock is reset.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification.
The file numbers are not recorded consecutively.
The file numbers are recorded in ascending order.
The card cannot be formatted.
Bearing information measured with this unit is different from the public bearing
indications.