About the measured altitude and atmospheric, Pressure, P143) – Panasonic DMC-TS5D User Manual

Page 143

Advertising
background image

- 143 -

GPS/Sensor

∫

About the measured altitude and atmospheric pressure

•

Altitude value may show errors depending on the change in atmospheric pressure compared to
areas such as locations with altimeter reference signs. Perform frequently with [Adjust] in [Altimeter].

•

Altitude announced onboard an airplane is measured using the atmospheric pressure surrounding
the airplane. It does not match the altitude actually measured inside the airplane.

•

Even if the unit is fixed at a constant altitude, the measured altitude may fluctuate due to the effects
of change in atmospheric pressure.
In coastal areas, the altitude changes by 1 m (3.3 feet) per 0.12 hPa.

•

Altitude and atmospheric pressure may not be measured
accurately in the following cases:

–

When there is a significant change in weather conditions
(Pressure and air temperature)

–

When there is a movement with a rapid change in altitude

–

When pressure is applied to the front or rear of this unit

¢1

–

When this unit is wet (after using underwater, etc.)

¢2

–

When closing the side door

¢2

¢1 Hold this unit as shown in the figure when measuring.
¢2 It will adapt to the ambient atmospheric pressure within a few minutes, and display correct

measurement values.

Advertising