Lamp, P174) – Panasonic DMC-TS5D User Manual
Page 174
- 174 -
Wi-Fi
∫
Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢2 A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It
cannot be sent if the size is greater than 4 GB.
•
Some images may not be played back or sent depending on the device.
•
Refer to the manual of the destination equipment or the WEB service for more information on how to
playback pictures.
∫
About the Wi-Fi connection lamp
•
When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to [ON], and
turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with
gauges.
•
The camera cannot be used to connect to a public wireless LAN connection.
•
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access
point.
•
We strongly recommend that you set an encryption to maintain information security.
•
It is recommended to use a fully charged battery when sending images.
•
When the battery indicator is flashing red, the connection with other equipment may not start or the
connection may be disrupted. (A message such as [Communication error] is displayed.)
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
•
Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
•
Do not remove the memory card or battery or move to an area without any reception while
sending images.
•
The LCD monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
Images to
send
Destination
[Smart
phone]
[PC]
[Cloud Sync.
Service]
[Web
service]
[AV device]
[Printer]
¢1
[Home]
[External]
JPEG
±
±
±
±
±
±
±
MP4
¢1
±
±
±
±
—
—
—
AVCHD
¢1, 2
—
±
—
—
—
—
—
3D
—
±
±
±
±
±
—
A Wi-Fi connection lamp
Lit blue:
The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection