Panasonic DMC-TS5D User Manual
Page 254
- 254 -
Others
•
Is there any memory remaining on the built-in memory or the card?
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Take pictures in bright places.
•
Has [High Sens.] in the Scene Mode been set? If so, the resolution of the recorded picture
decreases slightly because of high sensitivity processing, but this is not a malfunction.
•
When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may
introduce slight changes to brightness and color. These are a result of the characteristics of the light
source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting, LED
lighting fixture, mercury lamp, sodium lighting etc., the colors and screen brightness may change or
horizontal striping may appear on the screen.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors. It appears when the subject has a bright part. Some unevenness
may occur in the surrounding areas, but this is not a malfunction.
It is recorded in pictures or motion pictures.
•
It is recommended that you take pictures while taking care not to expose the
screen to sunlight or any other source of strong light.
Taking pictures using Auto Bracket is not possible.
The recorded picture looks rough.
Noise appears on the picture.
Striping or flicker may appear under lighting such as fluorescent lighting and LED
lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors.
This is not a malfunction.
The brightness or the hue of the recorded picture is different from the actual scene.
Reddish horizontal streaks appear on the LCD monitor during recording.