Panasonic DMC-TS5D - Manual (Page 214)

- 214 -
Connecting to other equipment
2
Turn on the TV and select the input to match the terminal in use.
3
Turn the camera on and then press [(].
• Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the left
and right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• Output from the HDMI micro cable has priority when both AV cable and HDMI micro cable are
connected.
• The connection with the USB connection cable will take priority when you connect the USB
connection cable simultaneously with the HDMI micro cable.
• When you play back a picture vertically, it may be blurry.
• When pictures are displayed, they may not be displayed properly depending on the type of TV.
• Environment information such as direction, altitude (water depth) and atmospheric pressure is not
displayed.
• No sound is output from the camera speakers.
• Read the operating instructions for the TV.
• Before removing a battery, turn the camera off and disconnect the AV cable or HDMI micro cable.
The recorded still pictures can be played back on a TV with an SD Memory Card slot.
•
Depending on the TV model, pictures may not be displayed on the full screen.
• The file format of the motion pictures that can be played back differs depending on the TV model.
• In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of
panorama pictures may not work.
• For cards compatible with playback, refer to the operating instructions of the TV.