Auxiliary power supply for powering transmitters – NOVUS V1.5x A User Manual
Page 12
Advertising
NOVUS AUTOMATION
www.fieldlogger.net
12/103
• Master
• Slave
AUXILIARY POWER SUPPLY FOR POWERING TRANSMITTERS
For non 24 V models, there is a 24 Vdc power supply available in the FieldLogger for powering transmitters in the field.
This auxiliary power supply is electrically isolated from the other FieldLogger terminals.
Below is the correct way to use the auxiliary power supply for powering 4-20 mA transmitters (2-wire).
Fig. 19 – Auxiliary power supply powering 4-20 mA (2-wire) transmitters
Advertising