Goulds Pumps 7200CB - IOM User Manual
Page 110
Advertising
Maintenance
c) Add or subtract shims (390C & 390M) until axial movement is between 0.010 and 0.015
inches (0.254 and 0.381 mm).
20. For pumps with oil pump only, if not already installed, install coupling key and coupling
onto oil pump shaft. Tighten set screw. Install coupling sleeve (ensure snap ring is in place)
over oil pump coupling hub.
21. Install oil pump (219), if supplied, or endplate (119C). If an oil pump is being installed,
ensure coupling sleeve engages coupling hub on pump. Tighten bolts (370L).
108
Model 7200CB, API Type BB5 Barrel Multistage / ISO 13709 2nd Edition / API 610 11th Edition Installation, Operation, and
Maintenance Manual
Advertising