Goulds Pumps 7200CB - IOM - Manual (Page 94)

Maintenance
seize compound to the register fit. Assemble the inboard suction cover (182A) onto the
suction cover (182).
WARNING:
Dry ice and other chilling substances can cause physical injury. Contact the supplier for information and
advise for proper handling precautions and procedures.
CAUTION:
Burn hazard. The intermediate cover will get hot. Wear insulated gloves when handling the intermediate
cover.
10. Install alignment dowel pin (185) into intermediate cover (150). Dowel pin is a press fit.
Chill pin using dry ice or other suitable chilling substance. Be prepared to tap the pin in
place with a soft faced hammer. Assemble intermediate cover (150) to the suction cover
(182) for single suction pumps or to the inboard suction cover (182A) for double suction
pumps. Subsequent assemblies will be to the previous intermediate cover (150). Step is not
required for 3 stage double suction pumps. The intermediate cover is an interference fit.
Heat the outer diameter of the previous cover to 300°F-400°F (150°C-200°C). Install
eyebolts (not supplied) into the lifting holes to assemble the intermediate cover (150).
92 Model 7200CB, API Type BB5 Barrel Multistage / ISO 13709 2nd Edition / API 610 11th Edition Installation, Operation, and
Maintenance Manual