SawStop T-Glide Fence System - Manual (Page 3)

front rail
rear rail
front tube
support leg (2)
extension table
leg support
bracket (2)
fence handle
T-Glide Rails
Hardware Pack
Owner’s Manual T-Glide Table
Hardware Pack
installation poster
(one for a Professional Cabinet Saw
and another for a Contractor Saw)
T-Glide fence
SawStop
5 mm hex key
5 mm ball-end
hex driver
Washers,
M10 (4) 24
20 Countersunk Socket
Head Bolts, M8 x 35 (4)
Lock Nuts, M10 (2) 25
Adjustment Bracket,
with Custom Screw Assembly (1) 13
Lock Washers,
M6 (2)
15 Socket Cap Screws,
M6 x 18 (2)
14
II Professional Series
T-Glide Table Hardware Pack
Lock Washers, M8 (8) 18
Washers, M8 (8) 17
16 Countersunk Socket Head Bolts, M8 x 16 (2)
Hex Nuts, M8 (10) 19 Foot, (2) 21
22 Countersunk Socket Head Bolts, M8 x 65 (2)
Hex Head Bolts, M10 x 40 (2) 23
F
T-Glide Rails Hardware Pack
2 Countersunk Socket Head Bolts, M8 x 25 (8)
Washers,
M8 (8) 3
Lock Washers, M8 (17) 4
II Professional Series
Countersunk Socket
Head Bolts, M8 x 16 (8) 1
Hex Head Bolts, M8 x 16 (9) 6
Hex Nuts, M8 (8) 5
F
SawStop
®
OWNER’S MANUAL
T-Glide TM Fence System-
Professional Series II
Unpacking Your T-Glide Fence System
While unpacking your saw, verify that you have all the components shown below for your specific fence system.
The T-Glide Fence System – Professional Series II is available in either a 52” system or a 36” system. Although the
components pictured below are from the 52” system, the components from the 36” system are similar.
SawStop T-Glide Fence System - Professional Series II 1