SawStop T-Glide Fence System - Manual (Page 7)

Installing Your T-Glide Fence System
Professional Cabinet Saw
3. Take two M8 x 25 countersunk socket head bolts and insert one bolt through the corresponding hole in the
end of each extension wing (see Fig. 3a). Place an M8 washer, an M8 lock washer, and an M8 hex nut on the
threaded end of each of the bolts (see Fig. 3b). Hand tighten the nuts; do not fully tighten them.
Fig. 3b
2
front rail
2
5
3
4
Fig. 3a
SawStop T-Glide Fence System - Professional Series II 5