SawStop Mobile Base - Manual (Page 21)

19 SawStop Professional Cabinet Saw Mobile Base
Raise
Lower
Never place fingers,
toes or other body part
under the mobile base.
! WARN
ING
Lower
Raise
Never place fingers,
toes or other body part
under the mobile base.
! WARNING
Using Your Mobile Base
1. Using your mobile base is simple and intuitive. Simply step down on the large foot pedal to raise the saw off
the floor and onto the wheels (see Fig. 41). Continue pressing down on the foot pedal until you hear the mobile
base lock in the raised position. Make sure that your foot does not contact the smaller release lever while you
are pressing down on the foot pedal, otherwise the mobile base will not stay in the raised position.
2. With the saw in the raised position you can move it as desired. The mobile base has two wheels on the left side
and two casters on the right side, so it may be easier to maneuver the saw by pushing from the right side.
Fig. 41
Fig. 4
foot pedal -
step here to raise
step on both the foot
pedal and the release
lever to lower the saw
release lever
Note: The mobile base has been designed to lift saws with or without extension tables. You do not need an
additional arm extending out from the mobile base to support your extension table. However, if you have an
out-feed table attached to your saw you must remove it before using the mobile base to move your saw.
3. To lower the saw back to the floor, step down on both the foot pedal and the release lever simultaneously (see
Fig. 4). Slowly lift your foot upwards to allow the saw to gently lower to the floor. Do not step on the release
lever without having your foot on the foot pedal or your saw will lower to the floor rapidly.