SawStop Mobile Base - Manual (Page 5)

3 SawStop Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 1
3. Locate the caster support,
the linkage bar, two M8 x 35
button head socket bolts, and
two M8 x 13.6 lock washers.
Note that one end of the
caster support has a mounting
shoulder and the other end
does not (see Fig. 3a). Mount
the linkage bar to the inside
of the caster support arm
nearest the end without the
mounting shoulder as shown
in Fig. 3b. Use the button head
sockets bolts, lock washers,
and a 5 mm hex key to mount
the linkage bar to the caster
support arm. Make sure the
linkage bar is positioned as
shown in Fig. 3b with the
caster support in the notch on
the linkage bar.
Fig. 3a
with a mounting shoulder without a mounting shoulder
4. With the saw resting on the packaging, facing up and
overhanging the edge, place the ends of the two caster
support arms through the two holes in the inside right
face of the saw, as shown in Fig. 4. Make sure that the
caster support is oriented so that the linkage bar is next
to the front of the cabinet.
Fig. 4
linkage bar
front
mounting
shoulder
down
linkage bar
caster
support
caster
support
arm
end without
a mounting
shoulder
notch

1
Fig. 3b