SawStop Mobile Base - Manual (Page 7)

5 SawStop Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 1
Fig. 7
7. Locate the wheel support and the two 3 inch wheels. Note that one end of the wheel support has a mounting
shoulder and the other end does not. Mount one of the 3 inch wheels between the two support arms nearest
the end of the wheel support that has the mounting shoulder using a fixed wheel axle and an M6 lock nut
from the hardware pack (see Fig. 7). The fixed wheel axle passes through the outer support arm and threads
through the inner support arm. Fully tighten the nut using a 17 mm wrench and a 10 mm wrench.
8. Mount the second 3 inch
wheel to the other end of
the wheel support using
the other fixed wheel axle,
but do not thread a nut onto
the axle (see Fig. 8). The
fixed wheel axle passes
through the outer support
arm and threads through
the inner support arm. Set
the wheel support aside for
a moment.
9. Locate the pedal assembly
and insert it into the hole in
the left side of the cabinet
as shown in Fig. 9. Insert
the pedal assembly as far
as possible and make sure
that the foot pad is facing
the top of the cabinet.
Raise Never place fingers, toes or other body p arts under the mobile ba se. ! WARNING
foot pad
pedal assembly
Fig. 8
Fig. 9
3 inch wheel
wheel support support
arms
6
end with a mounting
shoulder
wheel
support
3 inch wheel
support arms
7
6