Setting the volume – BrandTech Scientific Transferpette-8/-12 electronic User Manual
Page 44
![background image](/manuals/464065/44/background.png)
1x
+
–
Press the up arrow key (+)
to increase the volume.
Holding the arrow key down
accellerates the rate of
change. ‚VOL‘ continues to
blink.
Press the ENTER key.
The display now shows the
new volume setting, in this
case, 102.8 µl in the PIP
mode.
2.
Change the volume
3.
Confirm volume
setting
The volume for the Transferpette
®
-8/-12 electronic is set at the factory to the nominal
volume of the instrument and can be changed quickly and easily.
Press the down arrow key
(-) to reduce the volume.
Holding the arrow key down
accellerates the rate of
change. ‚VOL‘ continues to
blink.
Reduce volume
Press one of the arrow keys
to activate volume selection.
‚VOL‘ blinks.
1.
Activate volume
setting
Increase volume
Setting the Volume
What to do
How to do it
Keys to press
Display readout
By pressing the MENU key any procedure can be cancelled! The display then moves to the next setting or
back to the initial display (depending on actual selection.)
Important:
44