Festo Стандартные цилиндры DNC-V с распределителем - Manual (Page 13)

Pneumatic linear cylinder
Festo 0506a English
13
1 Operating elements and connections
English
1
1
1
1
1 2
2
2
2
3
3
3
4
3
5
5
5
2
3
1 Fastening possibilities depending on
design:
ć through−holes in the housing /
bearing cover / end cover in the
integrated flange ć internal thread
in the screws of the bearing cover or
end cover
ć external thread on the bearing cover /
end cover
ć transverse bore in the flattened pivot
of the bearing cover / end cover
2 Compressed air connections in the
bearing/end covers or directly in the
housing
3 Thread for fastening the load:
ć external thread on the piston rod
ć internal thread in the piston rod
or
ć internal thread in the font plate
4 Adjusting screws for end position
cushioning in the bearing/end covers
(only on cylinders with adjustable end
position cushioning)
5 Groove for proximity switch