Kramer Electronics VP-8x4AK - Manual (Page 24)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VP-8x4AK
20
4. Set the machine numbers of the connected machines, as described in
Section 6.8 , by set the first VP-8x4AK unit as Machine # 1 and the
following 15 VP-8x4AK units as Machine # 2 to Machine # 16.
5. Set the RS-485 TERM DIP-switch ON on the first and last VP-8x4AK
units (terminating the RS-485 line at 120
Ω). Set the RS-485 TERM
DIP-switch OFF on the other VP-8x4AK units.
Machine # 1 (Master)
Machine # 2
Machine # 16
Up to 16
Units
Figure 11: Control Configuration via RS-232 and RS-485