Kramer Electronics VP-8x4AK - Manual (Page 34)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling via the Embedded Web Pages
30
Figure 20: Switching an Input to an Output
9.2.2 Operate in the Confirm Mode
By default, the device is set to the At-Once mode. To operate in the Confirm
mode:
1. Click the red Offline button.
2. Click the desired switching-point in the switching matrix.
Audio/video indicator outlines appear and the Take and Cancel buttons
turn blue.
Figure 21: Switching an Input to an Output in the Confirm Mode
3. Click either Take (to accept change) or Cancel.
You can repeat steps 2 and 3 several times.
To confirm several actions, select several switching points and then press TAKE
4. Click the Online button to exit the Confirm mode.
If you click the Online button before you click the TAKE button, the
following warning appears: