Kramer Electronics VP-8x4AK - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-8x4AK
24
7.4.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate IN button (the button # corresponding to the setup
#). If in the Confirm mode, that setup configuration will blink in the 7-
segment display, together with the RCL button and the TAKE button, and
will only be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
Tip: If you cannot remember which one of the eight setup configurations is
the one that you want, set the VP-8x4AK to the Confirm mode and manually
scan
1
7.5 Locking the Front Panel
all the input/output configurations until you locate it.
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock
2
To lock the VP-8x4AK:
your VP-8x4AK. Unlocking releases the
protection mechanism.
• Press the LOCK button for more than two seconds, until the LOCK
button is illuminated.
The front panel is locked. Pressing a button will have no effect other than
causing the LOCK button to blink
3
To unlock the VP-8x4AK:
• Press the illuminated LOCK button, for more than two seconds, until the
LOCK button is no longer illuminated and the front panel unlocks
7.6 Choosing the Audio-Follow-Video or Breakaway Option
You can switch stereo audio signals in one of two ways, either:
• Audio-follow-video (AFV), in which all operations relate to both the
video and the audio channels; or
• Breakaway, in which video and audio channels switch independently
1 By pressing the RCL button followed by the INPUT/OUTPUT buttons
2 Even when the front panel is locked you can still operate via RS-232 or RS-485, as well as via the infrared remote control
transmitter
3 Warning that you need to unlock to regain control via the front panel