Kramer Electronics VP-8x4AK - Manual (Page 30)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Flash Memory Upgrade
26
Gain level values are relative since the audio input signal can be also
adjusted, while the range of the output gain remains constant
3
, independent of
the input level adjustment. When decreasing the audio level below the
minimum display value, the 7-segment display shows L, indicating low audio
value.
8 Flash Memory Upgrade
The VP8x4AK uses a microcontroller that runs firmware located in FLASH
memory.
The latest version of firmware and installation instructions can be
downloaded from the Kramer Web site at
www.kramerelectronics.com .
9 Controlling via the Embedded Web Pages
You can remotely operate the VP-8x4AK using a Web browser via the
Ethernet connection (see
Section 9.1 ). To be able to do so, you must use a
supported Web browser; Microsoft (V6.0 and higher), Chrome or Firefox
(V3.0 and higher).
To check that Java is installed correctly and running, browse to:
http://www.java.com/en/download/help/testvm.xml
This page runs a test and displays a Java success (see Figure 15 ) or failure
message.
Figure 15: Java Test Page Success Message
If you do not see the success message, follow the instructions on the page to:
• Load and enable Java
• Enable Javascript in your browser