Kramer Electronics VP-8x4AK - Manual (Page 27)

Operating the VP-8x4AK
23 23
7.3.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode), do the following:
1. Press an OUT-IN combination.
The corresponding 7-segment display blinks with the new value. The
TAKE button also blinks.
2. Press the blinking TAKE button to confirm the action.
The corresponding 7-segment display no longer blinks. The TAKE button
illuminates.
To confirm several actions (in the Confirm mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding 7-segment display blinks. The TAKE button also
blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding 7-segment display no longer blinks. The TAKE button
illuminates.
7.4 Storing/Recalling Input/Output Configurations
You can store and recall up to 16 input/output configuration setups
1
Figure 14
via the
control application or the embedded Web pages. You can store and recall up
to eight input/output configuration setups via the eight SELECTOR IN front
panel buttons, as
illustrates:
Figure 14: Storing and Recalling using the Input/Output Buttons
7.4.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the eight IN buttons (this will be the setup # in which the
current status is stored). If in the Confirm mode, press the blinking TAKE
button to confirm the action.
The memory stores the data at that reference.
1 You can store and recall audio and video configurations and audio gain data