Kramer Electronics VP-8x4AK - Manual (Page 29)

Operating the VP-8x4AK
25 25
7.6.1 Setting the Audio-Follow-Video Option
To set the Audio-follow-video (AFV) option, press the AFV button:
• If the AUDIO and VIDEO configurations are the same, then the AFV
button illuminates. The audio follows the video.
• If the AUDIO differs from the VIDEO, then the TAKE and the AUDIO
buttons flash. Also, the audio outputs, which are changed, flash
1
7.6.2 Setting the Breakaway Option
in the
INPUT STATUS 7-segment display. Press the TAKE button to confirm
the modification. The audio follows the video.
To set the Breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video
control only) button:
• If the AUDIO button illuminates, switching operations relate to Audio,
and the 7-segment display shows the audio status
• If the VIDEO button illuminates, switching operations relate to Video,
and the 7-segment display shows the video status
7.7 The Audio Input/Output Gain Control
To increase or decrease the audio gain
2
1. Select the output whose audio gain you want to change.
For example, press OUT 4.
The OUT 4 button blinks and so does the respective input on the display.
:
2. Press the + or – button to increase or decrease, respectively, the audio
gain of the selected output.
The audio gain display lights and the audio level value shows on the
display.
The VP8x4AK output audio signal level
3
The factory default audio gain is set to 0dB. An audio gain value of 0dB
indicates that the output signal value is identical to the input signal value.
When increasing/decreasing the audio gain, the output signal level is
higher/lower than the input signal level.
is shown on the REL. AUDIO
LEVEL 7-segment display.
1 Warning that you are about to modify the audio configuration for AFV operation
2 When selecting an input to increase/decrease its volume gain, press and hold that input button for about 3 seconds
3 The input level ranges from -100 to +20 and the output level ranges from -100 to +7.5