1 terminology used in this user manual, Terminology used in this user manual, Table 1: terminology used in this user manual – Kramer Electronics VP-8x4AK User Manual

Page 8

Advertising
background image

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

4

Control the VP-8x4AK using the front panel buttons, or remotely via:
• RS-485 or RS-232 serial commands (using Kramer 2000 and 3000

protocols) transmitted by a touch screen system, PC, or other serial
controller

• The Kramer infrared remote control transmitter or infrared remote

extension cable transmitter (optional)

• The ETHERNET

The VP-8x4AK is dependable, rugged, and fits into two vertical spaces (2U)
of a standard 19” professional rack.

To achieve the best performance:
• Use only good quality connection cables

1

• Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer VP-8x4AK
away from moisture, excessive sunlight and dust

to avoid interference,

deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).

3.1

Terminology Used in this User Manual

Table 1

defines some terms that are used in this user manual:

Table 1: Terminology Used in this User Manual

Term

Definition

802.3

The standard specification for ETHERNET that is maintained by the Institute of Electrical and

Electronics Engineers (IEEE).

Dynamic Host Configuration

Protocol (DHCP)

Allows the network administrator to distribute IP addresses from a central point and

automatically send a new IP address when an Ethernet point is plugged into a different
network location.

Gateway

A network position serving as an entry to another network. On the Internet, a node or

stopping point can be either a gateway node or a host (end-point) node.

IP Address

A 32-binary digit number that identifies each sender or receiver (within a network via a

particular server or workstation) of data (HTML pages or e-mails) that is sent in packets
across the Internet. Every device connected to an IP network must have a unique IP
address. This address is used to reference the specific unit.

Local Area Network (LAN)

Computers sharing a common communications line or wireless link, which often share a

server within a defined geographic area.

Media Access Control

(MAC) Address

A computer's unique hardware number (or address) in a LAN or other network. On an

Ethernet LAN, the (MAC) address is identical to the Ethernet address.

Transmission Control

Protocol/Internet Protocol
(TCP/IP)

The basic communication language or protocol of the Internet that breaks the message into

appropriately sized packets for the network, and can be used as a communications protocol
in an intranet or an extranet.






1 Available from Kramer Electronics on our Web site at

http://www.kramerelectronics.com

Advertising