Kramer Electronics VP-8x4AK - Manual (Page 36)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling via the Embedded Web Pages
32
Figure 24: Save Preset Message
5. Click OK.
The new In/Out configuration is stored in Preset 03.
To recall a preset configuration:
1. Select the desired preset number from the Preset drop-down list
1
2. Click and hold the Preview button to view the selected Preset and then
release.
(for
example, Preset 08):
3. Click Recall.
The following window appears:
Figure 25: Load Preset Message
4. Click OK.
The new In/Out configuration takes effect.
You can recall a preset configuration in the Confirm mode by repeating the
above procedure in the Offline state. The recalled configuration will become
active when you press the Take button.
1 When selecting a preset that contains a configuration, the Recall button changes from gray to dark blue