MSI RD480 Neo2 User Manual
Page 121
6-6
MS-7194 ATX Mainboard
w
Stripe Size
This option is effective for RAID 0/0+1. The user can choose a stripe size
from 64KByte, 32KByte, 16KByte(default), 8KByte and 4KByte. If the user uses RAID
0 for most A/V editing application or files, 64KByte is recommended.
1.
Press
‘Enter’ key to activate this item. Then 64K, 32K, 16K, 8K, 4K items appears
at bottom of Main Menu.
2.
Use
‘↑’ ‘↓’ to choose the stripe size.
w
Delete RAID Setting & Partition
W hen RAID BIOS detects a broken RAID, the user can use Delete RAID
Setting & Partition to delete the broken RAID.
1.
Press
‘Enter’ key to activate this item. An ‘E’ flash cursor appears at the ‘Drive
Select Menu
’ for the user to choose defined array drive to be deleted.
2.
‘Data on RAID drives will be deleted (Y/N)?’ prompt message shows up to con-
firm the user
’s selection.
3.
Press
‘Y’ key, and then the data in drives is destroyed.
4.
“RAID Array List” automatically updates itself.
w
Delete All RAID Setting & Partition
1.
Press
‘Enter’ key to activate this item.
2.
‘Data on RAID drives will be deleted (Y/N)?’ prompt message shows up to con-
firm the user
’s selection.
3.
Press
‘Y’ key, and then the data in drives is destroyed.
4.
‘RAID array List” automatically updates itself.
w
Rebuild RAID Array
W hen a drive is replaced or BIOS detects a broken RAID, the user can use
Rebuild RAID Array to keep data coherency for RAID 1 and 0+1.
1.
Press
‘Enter’ key to activate this item. An ‘R’ flash cursor appears at the ‘Drive
Select Menu
’ for the user tochoose the valid drive of previously defined RAID 1 or
0+1 to rebuild.
2.
BIOS shows the source (marked with
‘M’) and target (marked with ‘m’) drives.
MSI Reminds You...
Make sure the data in drives is no longer in use before deleting RAID
Array.
MSI Reminds You...
Make sure the data in drives is no longer in use before deleting RAID
Array.
MSI Reminds You...
Make sure the data in target drive is no longer in use before rebuilding
RAID Array.