MSI RD480 Neo2 - Manual (Page 60)

3-15
BIOS Setup
ECP DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port
with the ECP feature. After selecting it, the following message will appear:
“ECP
Mode Use DMA. ” At this time, the user can choose between DMA channel [DMA3]
or [DMA1].
SATA Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
Serial ATA Controller
This item allows you to enable/disable the SATA controller. Setting options:
[Enabled], [Disabled].
RAID Function
This item allows you to enable/disable the on-chip SATA RAID function. Setting
options: [Disabled], [Enabled].