MSI RD480 Neo2 - Manual (Page 69)

3-24
MS-7194 ATX Mainboard
[Captain] 3rd level of overclocking, also the default value of "Load High
Performance Defaults", increasing the CPU frequency by 5%.
[Colonel] 4th level of overclocking, increasing the CPU frequency by 7%.
[General] 5th level of overclocking, increasing the CPU frequency by 10%.
[Commander] 6th level of overclocking, increasing the CPU frequency by 15%.
Cool ’n’Quiet
This feature is especially desiged for AMD processor, which provides a CPU tem-
perature detecting function to prevent your CPU
’s from overheading due to the heavy
working loading. Setting options: [Disabled], [Auto].
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and
overclock the processor by adjusting the FSB clock to a higher frequency. Select the
number between [200]~[350] for needed frequency.
Adjust CPU Ratio Mode
Setting to [Auto] enables CPU Ratio automatically to be determined. Setting options:
[Auto], [Manual].
Adjust CPU Ratio
W hen the Adjust CPU Ratio Mode is set to [Manual], the field is adjustable. This item
allows you to adjust the CPU ratio. It is available only when the processor supports
this function. Setting options: [x5~x19].
HT Link Speed
This setting specifies the maximum operating frequency of the Hyper Transport link
’s
transmitter clock. Setting options: [Auto], [800 MHz ~ 1 GHz].
Adjust PCI Express Frequency
This item allows you to select the PCI Express frequency (in MHz) and overclock the
processor by adjusting the PCI Express frequency to a higher frequency. Select the
number between [100]~[200] for needed frequency.
PCI Express Voltage
This field shows the current voltage of PCI Express slot.
Adjust DDR Memory Frequency
Setting to Auto, the system will auto detect the memory clock. Setting to Manual, the
“DDR Memory Frequency” item will appear and allows you to select the memory
clock. Setting options: [Auto], [Manual].
DDR M emory Frequency
W hen the Adjust DDR Memory Frequency is set to [Manual], this field is selectable.
Setting options: [100], [133], [166], [200].