MSI RD480 Neo2 - Manual (Page 56)

3-11
BIOS Setup
Advanced Chipset Features
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
Bank Interleave
This field selects 2-bank or 4-bank interleave for the installed SDRAM. Setting options:
[Auto], [2-W ay] and [4-W ay].
Burst Length
This setting allows you to set the size of Burst-Length for DRAM. Bursting feature is
a technique that DRAM itself predicts the address of the next memory location to be
accessed after the first address is accessed. To use the feature, you need to define
the burst length, which is the actual length of burst plus the starting address and
allows internal address counter to properly generate the next memory location. The
bigger the size, the faster the DRAM performance. Setting options: [4 Beat] and [8
Beat].
DRAM Data Integrity Mode
Select ECC (error-correcting code) or Non-ECC (Non error-correcting code), accord-
ing to the type of installed DRAM.
Dual Slot GFX Configuration
Setting
“Auto” to auto detect the dual graphics cards. Or you can set to manual to set
the graphics card configuration manually.