MSI RD480 Neo2 - Manual (Page 122)

6-7
Introduction to ULi M1573 RAID
3. Lastly a prompt message ‘Duplicate Data from M to m (Y/N)?’ asks whether to do
drive copy. The source and target drives are indicated by ‘M’ and ‘m’ in ‘Drive
Select M enu ’ respectively. Press ‘Y’ to start the rebuild process and data
duplication.
4. The process status bar shows up during the duplication process.
w Create RAID 0 Stripe x4 for Performance
1. Press ‘Enter’ key to activate this item.
2. The prompt ‘Data on first 4 drives will be deleted (Y/N)’ appears.
3. Press ‘Y’, and then some necessary information will be written to the drives,
which will destroy the original data in the drives.
4. Next, the Array Name input line appears for the user to key in a name for the
newly created array. The effective characters for an array name is
‘0’-‘9’, ‘A’-‘Z’,
‘a’-‘z’, space and underscore.
5. After the RAID array has been created successfully, its information shows up at
RAID Array List.
Drive Select Menu
This menu lists the available drives and their information. There are three indicator
bars in this menu: two RAID Drive Selection Bar and one Boot Drive Selection Bar.
RAID Array List
This list shows the existing and newly created RAID arrays.
MSI Reminds You...
Make sure the data in drives is no longer in use before creating RAID 0.